Gates of Arimyth :: View topic - New, and need a quick Step By Step Help

http://forum.arimyth.com/viewtopic.php?f=9&t=5949

Have you actually installed D2, then updated to 1.10, then installed HU over the top? I don't see where you mentioned updating to 1.10.

I have never seen this issue. XP should be the easiest OS to use to install this.

First of all, if you start from fresh install this link will provide 1.0x to 1.10 patch. Its the one I use.
http://files.arimyth.com/HU/LODPatch_110.exe

Then you said you getting errors when launching HU.bat. We arent using this anymore. Just start D2 with the launcher Diablo II.exe

Well have you tried running that .exe from that 1.2 version? That's what I use to do and never faced any problem.

If i am correct, HU.bat was used for the anti-hack program in the past. Since it haven't been upgrade from a long time, HU.bat is now out of date. It's still possible to run it from there, but you'll need to modify the file.

8- Create a shortcut to your Diablo II.exe and add -direct -txt to your target of that shortcut.

Just launch D2 like if you were playing on normal battle.net. Like I mention in step 8 of the link I posted on first page.

Quote:

8- Create a shortcut to your Diablo II.exe and add -direct -txt to your target of that shortcut.

Author:	Lerago [ Wed Sep 19, 2012 12:37 am ]
Post subject:	New, and need a quick Step By Step Help
Alrighty; sorry for interrupting everyone, but I am a tad bit new of transferring files and moving things, I run Windows XP. I am just trying to get SoloHU on my computer; I have a d2loader just in case, but also bought a whole new D2 just in case of anything. So if anyone could guide me step by step I would be very appreciative I also have Skype if possible.. Yes, I am that bad off ^^''

Author:	TheHinky [ Wed Sep 19, 2012 9:21 am ]
Post subject:	Re: New, and need a quick Step By Step Help
viewtopic.php?f=9&t=5949

Author:	Lerago [ Wed Sep 19, 2012 11:07 am ]
Post subject:	Re: New, and need a quick Step By Step Help
TheHinky wrote: http://forum.arimyth.com/viewtopic.php?f=9&t=5949 Create a shortcut to your Diablo II.exe and add -direct -txt to your target of that shortcut. What does this mean?

Author:	kramuti [ Wed Sep 19, 2012 1:31 pm ]
Post subject:	Re: New, and need a quick Step By Step Help
http://s203.photobucket.com/albums/aa12 ... 734704.jpg

Author:	Lerago [ Thu Sep 20, 2012 12:44 am ]
Post subject:	Re: New, and need a quick Step By Step Help
Alrighty, did everything that was there.. And I popped up with "The ordinal 10040 could not be located in the dynamic link library D2Net.dll. Any help with that only please Sorry for acting like a nooby..

Gates of Arimyth http://forum.arimyth.com/

New, and need a quick Step By Step Help http://forum.arimyth.com/viewtopic.php?f=9&t=5971	Page 1 of 1

Author:	TheHinky [ Fri Sep 21, 2012 11:26 am ]
Post subject:	Re: New, and need a quick Step By Step Help
You're getting this error when joining a game? This seems like a bad install from the d2modsteup.bat file. I though there were no problem installing it on XP before. I guess try a few times to install/uninstall that file by double clicking on it. Might be lucky on one time.

Author:	Lerago [ Fri Sep 21, 2012 7:28 pm ]
Post subject:	Re: New, and need a quick Step By Step Help
Well, it is whenever I try to open it with HU.bat; and I tried to uninstall and reinstall the mod a few times, and sadly I couldn't get it to work anymore.

Author:	kramuti [ Sat Sep 22, 2012 7:02 pm ]
Post subject:	Re: New, and need a quick Step By Step Help
Have you actually installed D2, then updated to 1.10, then installed HU over the top? I don't see where you mentioned updating to 1.10. I have never seen this issue. XP should be the easiest OS to use to install this.

Author:	Lerago [ Sun Sep 23, 2012 6:30 am ]
Post subject:	Re: New, and need a quick Step By Step Help
kramuti wrote: Have you actually installed D2, then updated to 1.10, then installed HU over the top? I don't see where you mentioned updating to 1.10. I have never seen this issue. XP should be the easiest OS to use to install this. Yes I installed D2, but my version is 1.2 (or the newest version) and I used a loader instead that is 1.10 ... I don't know if it had worked or not.. It wouldn't open D2 after I tried it... I don't really know how to change it to 1.10 easily But I did do the core install, and all of that stuff afterwards, but it still didn't work to any avail.. It may have been wrong at the trying to get it to 1.10 .. =/

Author:	TheHinky [ Sun Sep 23, 2012 7:52 pm ]
Post subject:	Re: New, and need a quick Step By Step Help
First of all, if you start from fresh install this link will provide 1.0x to 1.10 patch. Its the one I use. http://files.arimyth.com/HU/LODPatch_110.exe Then you said you getting errors when launching HU.bat. We arent using this anymore. Just start D2 with the launcher Diablo II.exe

Author:	Lerago [ Mon Sep 24, 2012 2:59 pm ]
Post subject:	Re: New, and need a quick Step By Step Help
TheHinky wrote: First of all, if you start from fresh install this link will provide 1.0x to 1.10 patch. Its the one I use. http://files.arimyth.com/HU/LODPatch_110.exe Then you said you getting errors when launching HU.bat. We arent using this anymore. Just start D2 with the launcher Diablo II.exe Well, I what I am saying is that once I install the Diablo 2 Lord of Destruction.. It is already version number 1.2 not 1.0 so I can't use that exe file (I already have it on my computer). So how would you not use HU.bat isn't that what makes the actual game run?

Author:	TheHinky [ Mon Sep 24, 2012 3:46 pm ]
Post subject:	Re: New, and need a quick Step By Step Help
Well have you tried running that .exe from that 1.2 version? That's what I use to do and never faced any problem. If i am correct, HU.bat was used for the anti-hack program in the past. Since it haven't been upgrade from a long time, HU.bat is now out of date. It's still possible to run it from there, but you'll need to modify the file.

Author:	Lerago [ Tue Sep 25, 2012 2:02 pm ]
Post subject:	Re: New, and need a quick Step By Step Help
TheHinky wrote: Well have you tried running that .exe from that 1.2 version? That's what I use to do and never faced any problem. If i am correct, HU.bat was used for the anti-hack program in the past. Since it haven't been upgrade from a long time, HU.bat is now out of date. It's still possible to run it from there, but you'll need to modify the file. Alrighty, so with that in mind; how would you go without having to use the .bat file? Worth one more time..

Author:	TheHinky [ Tue Sep 25, 2012 4:30 pm ]
Post subject:	Re: New, and need a quick Step By Step Help
Just launch D2 like if you were playing on normal battle.net. Like I mention in step 8 of the link I posted on first page. Quote: 8- Create a shortcut to your Diablo II.exe and add -direct -txt to your target of that shortcut.

Page 1 of 1	All times are UTC - 5 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/

Author:	Lerago [ Wed Sep 26, 2012 9:42 pm ]
Post subject:	Re: New, and need a quick Step By Step Help
TheHinky wrote: Just launch D2 like if you were playing on normal battle.net. Like I mention in step 8 of the link I posted on first page. Quote: 8- Create a shortcut to your Diablo II.exe and add -direct -txt to your target of that shortcut. After attempting to run it with the "Diablo II.exe -direct -txt. It still doesn't work, saying "Cannot load D2Client.dll:Error 182. ...Can't join a single game..