| Gates of Arimyth http://forum.arimyth.com/ |
|
| Doubble clicking the mod in D2se Results in.. http://forum.arimyth.com/viewtopic.php?f=9&t=13822 |
Page 1 of 1 |
| Author: | SchindlersFist [ Sun Jan 10, 2016 7:28 am ] |
| Post subject: | Doubble clicking the mod in D2se Results in.. |
Hey all, As the subject states, I have done everything as advised on the main forum. When I double click to run the mod.. D2se closes and nothing happens. If I click run plugin instead of double clicking the mod in d2se, Same thing happens. I tried running d2se in compatibility mode windows xp service pack 2 and 3. Both resulted in this error message when doing the same thing stated above. (It wont let me attach the photo because the attachment quota has been reached..) I am on windows 8.1 also. |
|
| Author: | SchindlersFist [ Sun Jan 10, 2016 7:47 am ] |
| Post subject: | Re: Doubble clicking the mod in D2se Results in.. |
Update, Everything in the above still stands. But! When I run Diablo II lord of destruction on my desktop from the original install by Cd I did. It shows the armyth network in the gateway. So I made an account and logged in. it said welcome to Hell unleashed. But As soon as I join or create a game, The door slightly opens then I get an error: ACCESS_VIOLATION c0000005 Also, if I then run the d2 from D2se or Diablo 2 on my desktop not Diablo II lord of destruction. Then the d2lod will not show the gateway and I must got into d2se and double click the mod, resulting in d2se closing. Then running d2lod icon from desktop will then again show it.. !UPDATE! Here is a log I found in my diablo 2 folder. --------------------------------------------------------------- ******* Realm startup at 2016-01-10 22:30:59.113 --------------------------------------------------------------- 22:30:59.113 ------------------------------------------------------ 22:30:59.113 2016-01-10 22:30:59 22:30:59.113 Diablo II running under Windows .Net (Version 6.002) 22:30:59.113 Vendor: Intel 22:30:59.113 Version: Pentium III (no brand) (Type 0, Family 6, Model C, Stepping 3, Brand 0) 22:30:59.117 Speed: Approx. 3399 MHz 22:30:59.117 Total Physical Memory: 4096.00MB 22:30:59.117 Application Path: C:\Program Files (x86)\Diablo II 22:30:59.120 Local IP: 192.168.0.4 22:30:59.120 Computer name: ******* 22:30:59.120 ------------------------------------------------------ 22:30:59.120 22:30:59.120 imagehlp.dll loaded for better stack crawls. 22:30:59.576 Detecting boards which support Direct3D... 22:30:59.576 Initializing for Direct3D on NVIDIA GeForce GTX 770 22:30:59.598 Driver: nvd3dum.dll 22:30:59.598 Version: 0.0.0.0 22:30:59.598 Supports AGP texturing: Yes 22:30:59.598 Supports mipmaps: Yes 22:30:59.598 Supports gamma control: Yes 22:30:59.598 Supports gamma calibration: No 22:30:59.598 Supports 32 Bit Cutscenes: Yes 22:30:59.598 Supports 24 Bit Cutscenes: No 22:30:59.598 ---------------------------------------------- 22:30:59.603 Opening Direct3D window at 640x480... 22:31:00.081 Texture Memory Total= 4095.938 MB, Free= 4093.594 MB 22:31:00.081 Local Total= 3072.000 MB, Free= 3069.656 MB 22:31:00.081 AGP Total= 1023.938 MB, Free= 1023.938 MB 22:31:00.081 Ignoring AGP Memory 22:31:00.954 22:31:00.954 22:31:00.954 ------------------------------------------------------ 22:31:00.954 PROGRAM: Diablo II v1.10 22:31:00.954 COMPUTER NAME: ****** 22:31:00.954 USER NAME: Dminge13 22:31:00.954 TIME: 2016-01-10 22:31:00.954 22:31:00.954 22:31:00.954 ***** UNHANDLED EXCEPTION: ACCESS_VIOLATION (c0000005) 22:31:00.954 Fault address: 6F84973F 01:0000873F C:\Program Files (x86)\Diablo II\D2Direct3D.dll 22:31:00.954 eax:00000000 ebx:00008000 ecx:3fff9a98 edx:ffff6c60 esi:6f862e6c 22:31:00.954 edi:00531000 ebp:00000000 esp:0018e748 eip:6f84973f flg:00010246 22:31:00.954 cs:0023 ds:002b es:002b ss:002b fs:0053 gs:002b 22:31:00.954 Stack bytes: Says that D2Direct3d.dll was the fault address. Should I reinstall d2 and not check the 3d option? |
|
| Author: | kramuti [ Sun Jan 10, 2016 11:19 am ] |
| Post subject: | Re: Doubble clicking the mod in D2se Results in.. |
C:\Program Files (x86)\Diablo II\D2Direct3D.dll Bad! HU cannot exist in program files (either of them) Bring HU up to C:\HU Don't know if this will solve it, but it is an issue. Also, use the glidewrapper (i have heard that the newest one has issues...1.4e, so I would suggest getting 1.4d of Sven's glidewrapper...i don't know which is included with the HU files. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|