Gates of Arimyth
http://forum.arimyth.com/

HU 1.3c Beta1 instructions and download links
http://forum.arimyth.com/viewtopic.php?f=8&t=5780
Page 1 of 1

Author:  dew [ Thu May 24, 2012 3:23 pm ]
Post subject:  HU 1.3c Beta1 instructions and download links

This is a patch and requires installation of hell unleashed version 1.3b first. Please make sure you download the patch that matches your install as this will avoid alot of problems.

1.3b download and install instructions can be found here

Normal install instructions and files
Extract these to your diablo 2 Hu installation and run the d2mod.bat and when it asks to uninstall hit ok. Then run it again making sure it asks you to install the mod. After that you need to run the game in direct txt. To run in direct txt all you need to do is right click on your diablo 2 shortcut and click on properties. Then add to the target line after the quotes -direct -txt
Expample - "C:\Program Files\Diablo II\Diablo II.exe" -direct -txt
Low Res files
High Res files

D2Se install instruction and files
These can just be extracted to your hell unleashed mod folder and you are ready to play
D2SE Low Res files
D2SE High Res files

I will try to get all the item changes posted to Hu Database this weekend and I will post there when they are completed. Here is a list of all the non item changes

General Change Log
Remove phys resist from boss hats and added pdr
pdr rises as boss resists are lowered from amp
Change amp progressionlvl 1 -15% to physical resist
gains -1% per level (hard point or soft point)
Firestorm no longer castable in bear form
Fixed poison spray facets to not cause mass counters
Increased mercenary ai range (A1 and A3 mercs only)
Increase frozen orb range from 30 to 40 (this only changes the distance of the main orb, ice bolts and nova are the same)
Amazons get from Strategy 1 pdr/ 1 mdr per hard point and 1 prd per 2 soft points/ 1 mdr per 3 soft points if there are no points in dodge or evade(intended for melee zons)
Hydra tier 5 damage buffed 15%
Feral rage life steal changed to 10% at level 1 +1% per 2 hard points
Slight damage boost to dire wolves
Change vengeance aoe to do elemental damage(currently does normal attack damage)
Change casting animations for chain lightning and lightning (same animation as tk)
skele mages----> now skeleton archers max of 8
Wc changed to 50% mag 50% phys
Bone spirit mana cost lowered slightly
Throwing knives to release small nova on impact nova does 3/4 weapon damage
Aldurs boots gain 10% damage resist with 2 items and another 10% with full set
Impale changed to behave like Barbarians berserk and damage% per level changed to 70% from 75%
Added Ki4m's recolored token for skellie archers
Added 2 Runewords intended to for summon Druids
Added 3 Runewords intended for ele Zealers
Changed Oblivion Runeword
-Buff Freezing/Immolation Arrow damage synergies to 20%. Also Freezing Arrow radius buffed to 4.5 yards.
-Buff fists of fire, claws of thunder, and blades of ice synergies to 30%.
-Buff Phoenix strike to 35% damage synergies, 15% fire dmg/per sec.
-Blizzard's number of hits nerfed by 20%
-Spirit blade and Spirit wolf summon delay set to 60 and 50(previously set at 50 and 38). 25 delay=1 second. So a 60 delay is just shy of 2.5 seconds.
-Return enchant to a 60 point build(20% warmth syn).
-Firewall delay set to 25(from 55).
Left Click Skills
Gfx Pack
Fixed strings
Fixed damage display on inferno and arctic blast, they no longer display 3x the damage you are actually doing

Finally lets keep this thread for installation issues only, I will make a bug thread. Thanks and have fun :D

Author:  alexzander [ Thu May 24, 2012 3:44 pm ]
Post subject:  Re: HU 1.3c Beta1 instructions and download links

Will this work for the direct text since i run from the .bat file?
"C:\Program Files\Diablo II\Hell Unleashed.bat" -direct -txt

Author:  retrov [ Thu May 24, 2012 3:49 pm ]
Post subject:  Re: HU 1.3c Beta1 instructions and download links

No, but you can edit the .bat file to look like:

"Diablo II.exe" -direct -txt

and then whatever else like -w -skiptobnet

Author:  dew [ Thu May 24, 2012 3:54 pm ]
Post subject:  Re: HU 1.3c Beta1 instructions and download links

No you would have to either create a shortcut to the diabloII.exe or rewrite the bat to activate it properly.

Ahh ninja'd like he said

Author:  alexzander [ Thu May 24, 2012 3:55 pm ]
Post subject:  Re: HU 1.3c Beta1 instructions and download links

Ok thank you

Just to be sure the Hell Unleashed.bat file is no longer needed to be ran correct?

Author:  dew [ Thu May 24, 2012 4:01 pm ]
Post subject:  Re: HU 1.3c Beta1 instructions and download links

alexzander wrote:
Ok thank you

Just to be sure the Hell Unleashed.bat file is no longer needed to be ran correct?


Nope not needed anymore

Author:  slappyNuts [ Thu May 24, 2012 4:18 pm ]
Post subject:  Re: HU 1.3c Beta1 instructions and download links

TY DEW! ^_^

Author:  kramuti [ Thu May 24, 2012 7:19 pm ]
Post subject:  Re: HU 1.3c Beta1 instructions and download links

removed and moved to bug thread

Author:  slappyNuts [ Wed May 30, 2012 1:56 am ]
Post subject:  Re: HU 1.3c Beta1 instructions and download links

Maybe include these links in the OP

Updated crafting recipes:
viewtopic.php?f=8&t=4699&start=20

Item Changes + new runewords:
viewtopic.php?f=11&t=5625

Author:  Wolfs [ Fri Jun 01, 2012 8:36 pm ]
Post subject:  Re: HU 1.3c Beta1 instructions and download links

The hydra changed discussed were not implemented? bolt to ball etc... or just missing on the list?

Author:  dew [ Fri Jun 01, 2012 11:58 pm ]
Post subject:  Re: HU 1.3c Beta1 instructions and download links

eh its just missing from list my bad

Author:  chaosofslayer [ Sun Jun 03, 2012 3:08 pm ]
Post subject:  Re: HU 1.3c Beta1 instructions and download links

Just a quick question about the beta. I haven't played HU in a long time and I'd like to start up a new character. If I start now do we have to play in the beta or could I play version 1.13b? I'd really like to start playing without having to worry about my character being wiped.

Author:  kramuti [ Mon Jun 04, 2012 11:07 pm ]
Post subject:  Re: HU 1.3c Beta1 instructions and download links

If a wipe has to be done at the end of the beta, it won't matter what patch you are on.

If you try 1.3b on the servers, then you are going to hit bugs, and crashes.

Please play the new one if you are playing on servers.

Edit: dew, beofre you submit, check the buglist in technical support. Some 1.3b stuff is still there too. Not sure what off that list was actually fixed.

Author:  Arranz [ Thu Sep 06, 2012 8:29 pm ]
Post subject:  Re: HU 1.3c Beta1 instructions and download links

Hey guys, how's it goin'.
Uhm, I was hoping you guys could give me some help in Installing this Mod. I played before, around a year ago and I installed it, after a few tries. Now it seems I'm back on the same grind, lol. This isn't rocket science, I followed every step needed, but if it's not one thing, it's another.
First I get the UNHANDED_EXCEPTION error like 10 times. finally after getting a reverter to 1.09, I revert Both my D2 folders (clean file, and HU file). Transfer over the D2exp.mpq file to both, ran the 1.10 patch loader. Finally it worked out and now the HU folder is at 1.10. Did all the steps, extracted 1.3b core first, then HighRes 1.3b afterwards. Now, when I run D2ModSetup, it says " Cannot find required dll, If Diablo is running you cannot setup this mod, Quit Diablo and try again. "
Im positive all the DLL files are there. Just to be sure, I re-extracted all the files in order once again, and even extracted both NormalRes and HighRes, still the same error. I wasn't getting it before, so I don't know why it's coming up now.

Edit: I went ahead and Just transfered the new 1.3c Beta highres files over to see if it changes it and, lord and behold, it's installed perfectly without any form of trouble. Must have been because the files needed were the 1.3c? lol. Just in case, I also changed the compatibility of game.exe, D2ModSetup, and Diablo II.exe to run with Windows exp service pack 3. Moving on.

Edit: Marvellous, I was able to successfully install the mod. No more UNHANDLED_EXCEPTION, or any other error. Its very simple to install but for some reason, tricky sometimes for some others. Maybe, hopefully, this might be able to help others install the mod? Simply as you said, Install Diablo, then LOD, patch with the loader to 1.10, and if for some reason you find an error, then obtain a 1.09 reverter system, which should come with the clean files. C&P the files over, re-do the 1.10 patcher. and if you so happen to be missing any files, just open the LOD installer disk and C&P the files to the folder. run the patch, then extract the files in the instruction in order. run D2ModSetup. and you shouldnt get any trouble.

I apologize for this long post.

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/